floof.org
RevK :verified_r:
RevK :verified_r: • mastodon (AP)

OK, I think I have it sussed, printing (usually) and UV overprint lined up, yay! #minecraft

I have a grandson who will be using this Netherite Ingot to tap-pay using his #Monzo card in the back.

Nephrite Ingot card holder
Nephrite Ingot card holder
#minecraft #monzo
This entry was edited (3 hours ago)
Link to source
1 1
🧝🏻 Thomas πŸ§™πŸ»
🧝🏻 Thomas πŸ§™πŸ» • mastodon (AP)
That's a cool product. Will get questions at the checkout!
Link to source
RevK :verified_r:
RevK :verified_r: • mastodon (AP)

Not planning to sell, best I could do is publish the files maybe.

I bet retail staff are used to all sorts of shit these days, it all started with watches. So as long as it goes "ding" they are happy.

This entry was edited (2 hours ago)
Link to source
1
🧝🏻 Thomas πŸ§™πŸ»
🧝🏻 Thomas πŸ§™πŸ» • mastodon (AP)

They were shocked when I started using my phone!

I just wish I could hook up an NFC tag and shove it in a teddy bear.

Link to source
RevK :verified_r:
RevK :verified_r: • mastodon (AP)

@tripplehelix I once removed the chip&pin from a bank card (non NFC) using a laser, and laser cut a recess in a printed plastic card so I could glue it in to the new card.

Result was a 100% custom printed card with a working bank chip in it.

Was amusing the one time I used it.

Oddly, these days, I could so easily over UV print a bank card with anything and it work for chip/pin and NFC.

@🧝🏻 Thomas πŸ§™πŸ»
Link to source
🧝🏻 Thomas πŸ§™πŸ»
🧝🏻 Thomas πŸ§™πŸ» • mastodon (AP)
I can see shops declining it, but then you could just use self checkout.
Link to source
RevK :verified_r:
RevK :verified_r: • mastodon (AP)

Hard to "decline", you whip it out and tap and it goes "ding", job done.

If they then want to cancel the transaction afterwards that would be just weird.

But then you remove the card from the ingot, all Minecraft over printed but with, say, monzo logo, and tap that, the same as before.

No what?

This entry was edited (2 hours ago)
Link to source
Pippin
Pippin friendica
@RevK :verified_r: @🧝🏻 Thomas πŸ§™πŸ» I'm sure I read about someone many years ago who had managed to dissolve the plastic of an Oyster card and leave just the chip and antenna, which they then installed in a stick. They could then, in a full set of wizard robes and pointy hat, tap the end of their staff on the reader to open the gates to the underground.
@RevK :verified_r: @🧝🏻 Thomas πŸ§™πŸ»
Link to source
8 2
🧝🏻 Thomas πŸ§™πŸ»
🧝🏻 Thomas πŸ§™πŸ» • mastodon (AP)
@pippin
Yes, I remember that story. Didn't they make videos?
@Pippin
Link to source
1
Ed Davies
Ed Davies • mastodon (AP)
@pippin @tripplehelix Yep, came here to say that. Was a Halloween costume.
@Pippin @🧝🏻 Thomas πŸ§™πŸ»
Link to source
1
sotolf
sotolf • gotosocial (AP)
Yeah, "Tube Gandalf" I remember that guy that was so much fun reading about :D
Link to source
🧝🏻 Thomas πŸ§™πŸ»
🧝🏻 Thomas πŸ§™πŸ» • mastodon (AP)
omg! You can make any card custom. I loved the custom design cards you could make. I always got people talking about mine last one I had.
Link to source
RevK :verified_r:
RevK :verified_r: • mastodon (AP)
@tripplehelix It is easier now most don't even do the embossing.
@🧝🏻 Thomas πŸ§™πŸ»
Link to source